| Laser parameters | Laser source model | S9-F-3 | S9-F-5 |
| Output Power | 3W | 5W |
| Beam quality M2 | ＜1.2 |
| Laser wavelength | 355 nm |
| Pulse frequency | 10-200 kHz |
| Output beam diameter | 0.8±0.2 mm |
| Output power stability | <5 |
| Working life | About 20,000 hours |
| Optical properties | Marking range | 100~300mm (range optional) |
| Engraving depth | ≤ 1mm (depending on power and time) |
| Engraving speed | ≤ 10000mm/s |
| Repeat accuracy | ±0.002 |
| Minimum marking line width | 0. 1mm |
| Minimum character height | 0.15mm |
| Use environment | Cooling way | External water cooling |
| System power supply | 500W / 220V / 50Hz (110V can be connected) |
| Temperature humidity | 0~40°, 30% RH 85%, air conditioner should be installed when used outside the range |
| Oil mist, condensation | Not allowed |
| Other parameters | Operating system | Flying marking system |
| File format | The software supports text, QR code, barcode, serial number, graphics and other marking content |
| Dimensions | 660X510X1460 mm |
| Packing size | Host: 850X510X280mm Water tank: 680X430X57mm Column: 1350X350X280mm |
| Total Weight | Including cooling water tank about 89kg |