| Model | MZF-20D | MZF-30D |
| Laser parameters | Laser source model | MFP-20X/20QS | MFP-30X/30QS |
| Output Power | 18.5/20W | 30W |
| Beam quality M2 | ≤1.4 | ≤1.4 |
| Pulse repetition frequency | 27-60 kHz | 30-60 kHz |
| Laser wavelength | ＜3% |
| Output power stability | 1064±5 nm |
| Working life | ＜3% |
| Engraving depth | About 100,000 working hours (non-lifetime) |
| Optical properties | Marking range | 100~150mm (range optional) |
| Engraving depth | ≤1mm (depending on power and time) |
| Engraving speed | ≤10000mm/s |
| Repeat accuracy | ±0.002 |
| Minimum marking line width | 0. 1mm |
| Minimum character height | 0.15mm |
| Use environment | Cooling way | Built-in air cooling |
| System power supply | 500W / 220V / 50Hz (110V can be connected) |
| Temperature humidity | 0~40°, 30% RH 85%, air conditioner should be installed when used outside the range |
| Oil mist, condensation | Not allowed |
| Other parameters | Support system | Windows operating system |
| Dimensions | 390X210X615 mm |
| Packing size | 680X5500X270 mm |
| Total Weight | About 20kg |